EINHELL TC-TS 2000 U Originalbetriebsanleitung Seite 77

6.8 Connection for dust extractor (Fig. 2, 26)
A connection for a dust extractor is provided on the extractor adap-
ter on the housing (16) and on the saw blade guard (2).
6.8.1 Dust extraction using a wet & dry vac (Fig. 2):
A wet & dry vac is not supplied with the product and is available
•
as an accessory.
Connect the wet & dry vac to the extractor adapter on the
•
housing (16).
6.8.2 Dust extraction using a vacuum extraction system and
extractor adapter set (Fig. 26):
The product is not supplied with an extractor adapter set with
•
suction hose (a) and adapter (b) or a vacuum extraction system,
which are available as accessories.
Using a crosstip screwdriver, undo the screw on the cap (36) on
•
the saw blade guard (2).
The the cap (36) from the saw blade guard (2).
•
Connect the adapter (b) to the extractor adapter on the housing
•
(16).
Connect the saw blade guard (2) and the adapter (b) to the suc-
•
tion hose (a).
A vacuum extraction system can now be connected to the 100
•
mm diameter of the adapter (b).
7. Using the saw
7.1 ON/OFF switch (Fig. 1, 16 / Item 11)
To turn the saw on, press the green button „I". Wait for the blade
•
to reach its maximum speed of rotation before commencing with
the cut.
To turn the equipment off again, press the red button „0".
•
Anl_TC_TS_2000_U_SPK9.indb 77 Anl_TC_TS_2000_U_SPK9.indb 77
GB
- 77 -
28.04.2020 14:40:10 28.04.2020 14:40:10