EINHELL TC-TS 2000 U Originalbetriebsanleitung Seite 72

construction and layout:
1. Lung damage if no suitable protective dust mask is used.
2. Damage to hearing if no suitable ear protection is used.
5. Before starting the equipment
Before you connect the equipment to the mains supply make sure
that the data on the rating plate are identical to the mains data.
Warning!
Always pull the power plug before making adjustments to the
equipment.
Unpack the bench-type circular saw and check it for damage
•
which may have occurred in transit.
The machine has to be set up where it can stand firmly, e.g. on a
•
work bench, or it must be bolted to a strong base.
All covers and safety devices have to be properly fitted before
•
the machine is switched on.
It must be possible for the saw blade to run freely.
•
When working with wood that has been processed before, watch
•
out for foreign bodies such as nails or screws etc.
Before you actuate the On/Off switch, make sure that the saw
•
blade is correctly fitted and that the machine's moving parts run
smoothly.
6. Assembly
Danger! Pull out the power plug before carrying out any
maintenance, resetting or assembly work on the circular saw!
6.1 Assembling the base frame (Fig. 3-4)
Danger! Make allowance for the weight of the machine and arran-
ge another person to help you if necessary!
Anl_TC_TS_2000_U_SPK9.indb 72 Anl_TC_TS_2000_U_SPK9.indb 72
GB
- 72 -
28.04.2020 14:40:09 28.04.2020 14:40:09