EINHELL TC-TS 2000 U Originalbetriebsanleitung Seite 69

any kind caused as a result of this.
Please note that our equipment has not been designed for use in
commercial, trade or industrial applications. Our warranty will be vo-
ided if the machine is used in commercial, trade or industrial busi-
nesses or for equivalent purposes.
The equipment is to be operated only with suitable saw blades (saw
blades made of HM or CV) It is prohibited to use any type of HSS
saw blade and cutting-off wheel.
To use the equipment properly you must also observe the safety in-
formation, the assembly instructions and the operating instructions
to be found in this manual.
All persons who use and service the equipment have to be ac-
quainted with these operating instructions and must be informed
about the equipment's potential hazards. It is also imperative to ob-
serve the accident prevention regulations in force in your area. The
same applies for the general rules of health and safety at work.
The manufacturer will not be liable for any changes made to the
equipment nor for any damage resulting from such changes. Even
when the equipment is used as prescribed it is still impossible to
eliminate certain residual risk factors.
The following hazards may arise in connection with the machine's
construction and design:
Contact with the saw blade in the uncovered saw zone.
•
Reaching into the running saw blade (cut injuries).
•
Kick-back of workpieces and parts of workpieces.
•
Saw blade fracturing.
•
Catapulting of faulty carbide tips from the saw blade.
•
Damage to hearing if essential ear-muffs are not used.
•
Harmful emissions of wood dust when used in closed rooms.
•
Anl_TC_TS_2000_U_SPK9.indb 69 Anl_TC_TS_2000_U_SPK9.indb 69
GB
- 69 -
28.04.2020 14:40:09 28.04.2020 14:40:09