Inhaltsverzeichnis
Werbung
Nur für den internen Gebrauch
9.4.12
PRI (nur in USA)
Einstellungen | Leitungen/Vernetzung | PRI
Slot / port field
Here you can select the slot / port of a PRI card.
Protocol field
In this field the adjusted protocol is shown.
Frame / Line / Encod field
Here it can be selected the Layer 1 parameters for physical encoding of the line. There are only
two choises, because it is not allowed to mix the parameters. Most new lines support ESF (Ex-
tended Superframe Mode) with a max. data throughout of 64 kbit/sec.
Older equipments and some special installations work in SF (Superframe Mode) with a max.
data throughout of 56 kbit/sec.
ISDN provider informs customer whether or not a line can operate in ESF mode.
The meanings of the other abbreviations are the encoding type (B8ZS: Bipolar 8 Zero Substi-
tution or ZCZ: Zero Code Suppression) and the D – channel encoding (normal or inverted).
B-channels field
Here is shown the used number of B-channels.
Inwats Duwa field
Dependant on a trunk group an INWATS DNIS (Dialed Number Identification Service) port is
assigned to a DID port. This DID port should be configured as a pseudo port, this means that
it is locked for basic DID. The entries in the CM tables are valid for the INWATS DNIS port.
CBC-trunk group field and CBC-pool field
These fields allow to install a CBC-pool. One CBC-pool can exist of up to eight services. In the
field CBC-trunk group the different CBC-access codes can be configured. In the field CBC-pool
the according service can be configured.
Siehe auch
–
Abschnitt 9.4, "Einstellungen | Leitungen/Vernetzung", auf Seite 9-50
A31003-H3590-M100-4-A9, 10/2011
HiPath 3000 Manager E, Administratordokumentation
Menü Einstellungen
Einstellungen | Leitungen/Vernetzung
settings03.fm
9-99
Werbung
Inhaltsverzeichnis
