Inhaltsverzeichnis
Werbung
Beispiele
In diesem Beispiel wird die Verwendung des Befehls "Set Config Port" beschrieben.
FCSM: user1> admin start
FCSM (admin) : user1> config edit
FCSM (admin-config) : user1> set config port 0
In diesem Beispiel wird die Verwendung des Befehls "Set Config Switch" beschrie-
ben.
FCSM: user1> admin start
FCSM (admin) : user1> config edit
FCSM (admin-config) : user1> set config switch
32
Bladecenter Fiber Channel-Switchverwaltung: Benutzerhandbuch
A list of attributes with formatting and current values will follow.
Enter a new value or simply press the ENTER key to accept the current value.
If you wish to terminate this process before reaching the end of the list
press 'q' or 'Q' and the ENTER key to do so.
Configuring Port Number: 0
------------------------
AdminState
(1=Online, 2=Offline, 3=Diagnostics, 4=Down) [Online
LinkSpeed
(1=1Gb/s, 2=2Gb/s, 3=Auto)
PortType
(TL / GL / G / F / FL / Donor)
TLPortMode
(1=TLTargetMode, 2=TLInitiatorMode)
ISLSecurity
(Any / Ours / None)
SymPortName
(string, max=32 chars)
ALFairness
(True / False)
ARB_FF
(True / False)
InteropCredit (decimal value, 0-255)
ExtCredit
(dec value, increments of 11, non-loop only) [0
FANEnable
(True / False)
LCFEnable
(True / False)
MFSEnable
(True / False)
MFS_TOV
(decimal value, 10-20480 msec)
MSEnable
(True / False)
NoClose
(True / False)
IOStreamGuard (Enable / Disable)
VIEnable
(True / False)
CheckAlps
(True / False)
Finished configuring attributes.
This configuration must be saved (see config save command) and
activated (see config activate command) before it can take effect.
To discard this configuration use the config cancel command.
A list of attributes with formatting and current values will follow.
Enter a new value or simply press the ENTER key to accept the current value.
If you wish to terminate this process before reaching the end of the list
press 'q' or 'Q' and the ENTER key to do so.
AdminState
(1=Online, 2=Offline, 3=Diagnostics) [Online]
BroadcastEnabled (True / False)
InbandEnabled
(True / False)
DefaultDomainID
(decimal value, 1-239)
DomainIDLock
(True / False)
SymbolicName
(string,max=32 chars)
R_T_TOV
(decimal value, 1-1000 msec)
R_A_TOV
(decimal value, 100-100000 msec)
E_D_TOV
(decimal value, 10-20000 msec)
FS_TOV
(decimal value, 100-100000 msec)
DS_TOV
(decimal value, 100-100000 msec)
PrincipalPriority (decimal value, 1-255)
ConfigDescription (string, max=64 chars)
Finished configuring attributes.
]
[Auto
]
[GL
]
[TLTargetMode]
[Any
]
[Port0
]
[False
]
[False
]
[0
]
]
[True
]
[False
]
[True
]
[10
]
[True
]
[False
]
[Disabled
]
[False
]
[False
]
[True]
[True]
[1]
[False]
[Fibre Channel Switch Module]
[100]
[10000]
[2000]
[5000]
[5000]
[254]
[IBM BladeCenter(TM) 2-port
Fibre Channel Switch Module]
Werbung
Inhaltsverzeichnis
