Giant Liv Bedienungsanleitung Seite 52

Chain tension
Some models have an internal gear hub
in the rear wheel. It may also have an
automatic chain-tensioner that maintains
proper chain tension.
If there is too much slack on the chain, the
tension may have to be adjusted, or the
chain may have worn out and needs to be
replaced.
How to check chain tension:
To check the chain tension, block crankarm
rotation and hold the chain in the middle
section between the front and rear
sprockets.
• Move the chain up and down to check
the slack on the chain;
• There should be between 10-15 mm of
vertical movement;
• If the movement is significantly more or
less, contact your dealer for technical
service.
Belt Drive:
Read the belt drive manufacturer's
operating instructions provided with the
E-bike for technical specifications and
requirements.
All models with belt drive have sliding rear
drop-outs and tension adjustment screws
to adjust the belt tension. The adjustment
procedure for a belt drive is the same as for
a chain.
50 Maintenance