Herunterladen Inhalt Inhalt Diese Seite drucken

Giant Liv Bedienungsanleitung Seite 29

Vorschau ausblenden Andere Handbücher für Liv:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 57
Lighting
Press and hold the 'Light' button (G) for 2 seconds to switch the bike lights on or off.
Light indicator (J) lights up when the light is switched on.
On S-Pedelecs (high speed E-bikes) the bike lights cannot be switched off. The 'Light /
Info' button (G) will switch between low beam and high beam.
Press the 'Light' button (G) to switch RideDash EVO screen backlight to bright, dimmed
of off.
Battery level indication
The remaining energy level of the EnergyPak is shown by the Battery indicator LEDs (K1 -
K5). Each LED represents 20% of the EnergyPak's capacity.
When battery power is less than 10%, LED K5 changes from white to orange.
When battery power is less than 3%, LED K5 blinks orange. The system will switch to
lowest assist level.
When battery power is less than 1%, the Power assist will shut down. The light system
will be still functional for at least 2 hours.
Info button
The 'Info' button (A) is used to control various screen functions if a RideDash or other
compatible bicycle computer is connected to the system. The specific functionality
depends on the connected device.
USB-C port
The USB-C port (F) can be used to power or charge an external device like a smartphone,
bike light or bicycle computer.
To access the USB-C port, use a fingernail to lift the cover. Use the appropriate cable
(not included) for your device to connect it.
The port is only a power outlet (5 V / 1.5 A). It cannot be used for data transfer.
CAUTION:
Do not use the USB-C port in wet or moist conditions.
Make sure no liquids, mud or dirt can enter the USB-C port.
Always close the USB port cover properly when the USB-C port is not in use.
System events
In case of a system event (malfunction), the RideControl will show an indication of the
event. Assist power will stop on most system events. Lighting indicator (J) will flash red.
One of the Power Assist indicator LEDs (I1 - I5) will start blinking as event indicator.
Event descriptions:
I5: Heat issue
Using your bike 27

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis