Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Power Assist
Smart Assist (AUTO):
The SyncDrive motor automatically adapts the power output to the circumstances to
optimize ride comfort and range.
•
Press and hold the 'Smart Assist' button (E) or 'Assistance level up' button (A) or
'Assistance level down' button (C) for 3 seconds to activate Smart Assist.
INFO: Smart Assist mode is not available on all models.
Assist level 1-5:
Manually select the assist level.
•
Press the 'Assistance level up' (A) or 'Assistance level down' (C) to change the assist
level.
Walk assist
The Walk assist function is to help you walk with the bike. It works up to a speed of 6 km/
h (4 mph). Walk assist is at its most powerful in the lowest gear, which means the smallest
chain ring up front and the largest sprocket on the rear.
INFO: The Walk assist function is not available in some countries due to local
regulations.
•
Press the 'Walk assist' button (B) to set Walk assist standby. LED B1~B5 on the
RideControl GO blink white.
•
Press and hold the 'Assistance level up' button (A) within 3 seconds to engage Walk
assist.
•
Release the 'Assistance level up' button (A) to stop or pause. Press and hold the
'Assistance level up' button (A) again within 3 seconds to re-engage.
•
Press any other button on the RideControl Ergo 3 to return to normal riding mode
immediately.
INFO: If no other action is performed within 3 seconds after pressing 'Walk assist'
button, the system will return to normal riding mode.
30 Using your bike
Werbung
Inhaltsverzeichnis
