Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
*Assist levels availability and power ratio per level depend on SyncDrive motor type and
factory system settings.
The screen shows the new assist level name and estimated remaining riding range for 2
seconds. Then the riding screen will return with an updated level indicator.
Settings
Changing display units between metric and /imperial.
On all RideControl Ergo controls:
•
Press and hold the 'Info' button for 5 seconds.
Resetting sub data fields.
On all RideControl Ergo controls:
•
Clear DIST, TRIP, AVG SPD:
•
Press and hold the 'Power assist up' and 'Power assist down' buttons
simultaneously for 3 seconds.
•
Clear MAX SPD:
•
Scroll to MAX SPD data field.
•
Press and hold the 'Power assist up' and 'Power assist down' buttons
simultaneously for 3 seconds.
Changing the screen brightness to low, medium or high.
On RideControl Ergo:
•
Press and hold the 'Walk assist' button for 2 seconds to change to the next brightness
level.
•
Release button after 2 seconds.
On RideControl Ergo 2:
•
Press the 'Light' button to change to the next brightness level.
On RideControl Ergo 3:
•
Press the 'Light' button to change to the next brightness level.
System events
A system event warning screen shows when a malfunction occurs:
•
A warning screen is displayed for 2 seconds.
•
An event description is displayed for 5 seconds.
•
The riding screen returns after the warning screen, showing the service indicator in the
status bar.
Quick troubleshooting steps:
1.
Make a note of the event description.
2.
Switch off the system.
Using your bike 43
Werbung
Inhaltsverzeichnis
