Giant Liv Bedienungsanleitung Seite 41

Battery level
80~100%
60~79%
40~59%
20~39%
10~29%
4~9%
0~3%
NOTICE: When battery power is less than 1%, the Power Assist will switch to off
mode. The light system will be still functional for at least 2 hours
System events
In case of a system event (malfunction), the RideControl Go will show an indication of the
event.
• All assist level indicators LEDs blink white 3 times.
• Power assist level indicator LED (B1 -B5) starts blinking indicating the event.
Event
EnergyPak error
SyncDrive error
Speed sensor error
Smart Gateway/Remote/
Display error
Motor overheated
Quick troubleshooting steps:
1. Note which Power assist level indicator LED is blinking (B1 -B5).
2. Switch off the system.
3. Visually check for any obvious cause.
4. Solve any easy and obvious cause, if safely possible (e.g. reinstall incorrectly placed
battery).
5. Switch the system back on.
If the issue is solved:
• Normal use may be continued.
LED on
1+2+3+4+5
1+2+3+4
1+2+3
1+2
1
1
1
LED on
1
2
3
4
5
LED color
White
White
White
White
White
Orange
Orange blinking
LED color
Red blinking
Red blinking
Red blinking
Red blinking
Red blinking
Using your bike 39