Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Power Assist
Smart Assist (AUTO):
The SyncDrive motor automatically adapts the power output to the circumstances to
optimize ride comfort and range.
•
Press and hold the 'Assistance level up' (C) or 'Assistance level down' button (B) for 2
seconds to activate Smart Assist.
•
Power assist indication LED (F3) will be lit to indicate Smart Assist is active.
•
If a RideDash is connected, it will show the Smart Assist level as 'AUTO' on the screen.
•
Press the 'Assistance level up' (C) or 'Assistance level down' button (B) to return to
manual assist level selection.
INFO: Smart Assist mode is not available on all models.
Assist level 1-5:
Manually select the power assist level.
•
Press the 'Assistance level up' (C) or 'Assistance level down' button (B) to change the
assist level.
•
Power assist indicator LEDs (F1 - F5) light to indicate the selected level.
•
F1 indicates the level with the lowest Power assist, but highest distance range (ECO
level).
•
F5 indicates the level with strongest Power assist, but highest energy consumption
(POWER level).
Assist off:
For riding without Power Assist, but with indications / bicycle computer and light
functions.
•
Press the 'Assistance level down' button (B), until all Power Assist indicator LEDs (F)
are off.
•
Motor assist is switched off
•
All other system functions remain available.
Walk assist
The Walk assist function is to help you while walking with the bike. It works up to a speed
of 6 km/h (4 mph). Walk assist is at its most powerful in the lowest gear, which means the
smallest chain ring up front and the largest sprocket on the rear.
INFO: The Walk assist function is not available in some countries due to local
regulations.
•
Press the 'Walk assist' button (A) to set Walk assist standby.
22 Using your bike
Werbung
Inhaltsverzeichnis
