Removing the EnergyPak:
•
Insert the key and unlock the EnergyPak
•
Hold the grip and pull the EnergyPak
backwards;
•
Slide out the EnergyPak.
Installing the EnergyPak:
•
Reverse removal procedure to install
the EnergyPak.
•
Make sure the slots are aligned
correctly at the bottom;
•
Push the EnergyPak forward and make
sure the EnergyPak is secured properly
(a 'click' can be noticed while doing so);
•
Pull out the key.
3.2 Charger
CAUTION:
•
Use only a suitable charger provided with the e-bike or provided by an
authorized dealer.
NOTICE:
•
Not every charger type or version may be shown in this manual. Please refer
to the support section of the website for more information on chargers.
•
Exact technical specifications and other details can be found on the printed
label on the charger.
12 Using your bike