Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
•
If a RideDash is connected, it will show the Smart Assist level as 'AUTO' on the screen.
•
Press the 'Assistance level up' (D) or 'Assistance level down' button (B) to return to
manual assist level selection.
INFO: Smart Assist mode is not available on all models.
Assist level 1-5:
Manually select the power assist level.
•
Press the 'Assistance level up' (D) or 'Assistance level down' button (B) to change the
assist level.
•
Power assist indicator LEDs (I1 - I5) indicate the selected level.
•
I1 indicates the level with the lowest Power assist, but highest distance range (ECO
level).
•
I5 indicates the level with strongest Power assist, but highest energy consumption
(POWER level).
Assist off:
For riding without Power Assist, but with indications / bicycle computer and light
functions.
•
Press 'Assistance level down' (B) button, until all Power assist indicator LEDs (I) are off.
•
Motor assist is switched off
•
All other system functions remain available.
Walk assist
The Walk assist function is to help you while walking with the bike. It works up to a speed
of 6 km/h (4 mph). Walk assist is at its most powerful in the lowest gear, which means the
smallest chain ring up front and the largest sprocket on the rear.
INFO: The Walk assist function is not available in some countries due to local
regulations.
•
Press the 'Walk assist' button (H) to set Walk assist standby.
•
Power assist indicator lights up in a back and forth sequence.
•
Press the 'Power assist Up' button (D) within 3 seconds to engage Walk assist.
•
Release the 'Power assist Up' button (D) to stop or pause Walk assist. Press again
within 3 seconds to re-engage.
•
Press any other button to return to normal riding mode immediately.
INFO: If no other action is performed within 3 seconds after pressing 'Walk assist'
button (H), the system will return to normal riding mode.
26 Using your bike
Werbung
Inhaltsverzeichnis
