With the EnergyPak removed from the
bike.
Start charging:
•
Remove the EnergyPak from the bike.
•
Connect the charger to the charge port
of the EnergyPak.
•
Connect the charger to an AC outlet.
•
The charging process starts.
Stop charging:
•
Disconnect the charger from the AC
outlet;
•
Disconnect the charger from the
EnergyPak.
•
Place the EnergyPak back into the bike.
INFO:
•
The LED(s) on the charger show the process status.
•
The LED indicator on the EnergyPak shows current energy level.
•
Charging can be stopped/interrupted at any time.
NOTICE: Disconnect the charger from the EnergyPak and AC outlet when the
EnergyPak is fully charged.
Using your bike 19