Ridecontrol Go - Giant Liv Bedienungsanleitung

3.3.5 RideControl GO

RideControl Go is the multipurpose control button integrated into the top tube. It features
an on/off button and colored LED lights to indicate support mode and battery level.
A. Power on/of button / multicolor LED
B. Power assist indicators (5 multicolor
LEDs)
C. Battery level indicators (5 multicolor
LEDs)
INFO: It is possible to use the RideControl Go in combination with additional
RideControl Ergo types and RideDash screens. Contact your authorized dealer or
visit the Giant website for more information.
Powering on and off
• Press the 'Power on/off' button (A) to switch on the system.
• Upon power on, all LED indicators will first light up white.
• After 2 seconds, the indicators will show the default Power assist level and Battery
level.
• Press the 'Power on/off' button (A) for 3 seconds and release the button to switch off
the system.
• Upon power off, all LED indicators will light up and blink white once and the system
powers off.
INFO: For Shimano motors, hold the 'Power on/off' button (A) for 0.5 seconds to
switch on the system.
Power assist level
Smart Assist function (AUTO):
The SyncDrive motor automatically adapts the power output to the circumstances to
optimize ride comfort and range.
• Press the 'Power on/off' button (A) twice to activate Smart Assist.
• Power assist indication LED B3 will light blue to indicate Smart Assist is active.
• If a RideDash is connected, it will show the Smart Assist level as 'AUTO' on the screen.
Using your bike 37