Energypak Carrier - Giant Liv Bedienungsanleitung

Removing the EnergyPak:
• Hold the battery in the frame to make
sure it cannot drop when unlocking;
• Insert the key and unlock the EnergyPak
• Pull the top of the EnergyPak sideways;
• Lift it out to remove the EnergyPak from
the bike.
Installing the EnergyPak:
• Reverse removal procedure to install
the EnergyPak.
• Make sure the connector slots are
aligned correctly at the bottom;
• Push the top of the EnergyPak and
make sure the EnergyPak is secured
properly (a 'click' can be noticed while
doing so);
• Pull out the key.

3.1.6 EnergyPak Carrier

Description
A. EnergyPak
B. Charging socket
C. Energy level indicator
Installation & removal
NOTICE: Always switch off the power first, before removing the EnergyPak.
Using your bike 11