4 Transport & Storage
Transport
CAUTION:
•
Any removable (electronic) parts, such as the charger and EnergyPak, should
always be removed from the e-bike before transport.
•
Always follow the instructions provided by the manufacturer(s) of the vehicle
and/or bicycle carrier being used for transporting the e-bike.
NOTICE:
•
Avoid transporting the e-bike in bad weather conditions when possible.
•
Properly cover any exposed electronic parts during transport when transport
in bad weather conditions can not be avoided.
•
High speeds combined with wind and rain could cause moisture to be
pressured into the electronic parts, which can lead to temporary malfunctions
or permanent defects.
•
If a malfunction occurs after transport in such conditions, remove the
EnergyPak and allow all parts to dry by air when the destination is reached.
E-bike storage
Store the e-bike in a location where it is protected from the elements whenever possible.
NOTICE:
•
Snow, rain, road salts and acids can cause certain parts of the e-bike to
corrode or deteriorate.
•
Ultraviolet light from the sun can fade the paint and can cause rubber or
plastic parts to become porous or to crack.
•
Exposure to excessively high or low temperatures during storage can cause
temporary malfunctions or even permanent defects.
Transport & Storage 47