Giant Liv Bedienungsanleitung Seite 35

• Press the 'Assistance level up' button (B) and 'Assistance level down' button (A)
simultaneously for 2 seconds to activate Smart Assist.
Manually select the assist level:
• Press the 'Assistance level up' (B) or 'Assistance level down' button (A) to change the
assist level.
• Power assist level indicator (J) indicate the selected level.
The screen shows the new assist level name and estimated remaining riding range for 2
seconds. Then the riding screen will return with an updated level indicator.
Screen
Status bar:
Status bar (H) always shows the battery status (5). Other icons (1-4) will appear when that
function is active.
1. Wireless connection: Indicates an active wireless connection between the bike and a
smartphone with the RIdeControl app.
2. Light status: The light icon indicates that the bike lights are switched on.
3. Notification: Indicates that there are new or unread messages on a smartphone.
Only via the RideControl app.
4. Service indicator: The service indicator (wrench icon) appears when periodic
technical maintenance is due or when a system event (malfunction) has occurred.
5. Battery status indicator: The battery status indicator shows the current EnergyPak
charge level from 100% to 0%.
• When battery power is less than 3%, the battery icon starts blinking. The system
will switch to lowest assist level.
• When battery power is less than 1%, the battery icon is blinking. Power Assist will
shut down. The light system will be still functional for at least 2 hours.
INFO: Some RideControl app functions and features mentioned in this manual
may not be available at this time. Compatibility and available features may also
vary depending on app version, e-bike model, component hardware/firmware
version, smartphone specifications, operating system, etc.
Using your bike 33