3.1.3 EnergyPak Smart Compact
Description
A.
EnergyPak
B.
Charging socket
C.
Energy level indicator
Installation & removal
NOTICE: Always switch off the power first, before removing the EnergyPak.
Removing the EnergyPak:
•
Hold the battery in the frame to make
sure it cannot drop when unlocking;
•
Insert the key and unlock the
EnergyPak. The EnergyPak will be
ejected slightly;
•
Remove the battery from the bike.
Installing the EnergyPak
•
Reverse removal procedure to install
the EnergyPak.
•
Make sure the connector slots are
aligned correctly at the bottom;
•
Push the top of the EnergyPak and
make sure the EnergyPak is secured
properly (a 'click' can be noticed while
doing so);
•
Pull out the key;
Using your bike 9