•
Press any other button to return to normal riding mode immediately.
INFO: If no other action is performed within 3 seconds after pressing 'Walk assist'
button (D), the system will return to normal riding mode.
Lighting / screen brightness
•
Press and hold the 'Light / Info' button (F) for 2 seconds to switch the bike lights on or
off.
•
Light indicator (2) lights up when the light is switched on.
•
Press the 'Light button (F) repeatedly to change the brightness of the screen between
low, medium or high.
USB-C port
The USB-C port (G) can be used to power or charge (5 V / 1.5 A) an external device like a
smartphone, bicycle light or bicycle computer.
•
To access the USB port, pull the corner and lift the cover.
•
Connect your device using an appropriate cable (not included).
•
After use close the USB port cover properly.
CAUTION:
•
The USB port is only a power outlet . It cannot be used for data transfer.
•
Do not use the USB port in wet or moist conditions.
•
Make sure no liquids, mud or dirt can enter the USB port.
Settings
Changing display units (metric/imperial):
•
Press and hold the 'Info' button (C) for 5 seconds.
Resetting sub data fields:
•
To clear DIST, TRIP, AVG SPD:
•
Press and hold the 'Assistance level up' (B) and 'Assistance level down' (A) buttons
simultaneously for 3 seconds.
•
To clear MAX SPD:
•
Scroll to MAX SPD data field.
•
Press and hold the 'Assistance level up' (B) and 'Assistance level down' (A) buttons
simultaneously for 3 seconds.
Using your bike 35