Commissioning, Operation; Commissioning; Operation - WIKA CPH6200 Betriebsanleitung

5. Commissioning, operation

6. Commissioning, operation
Personnel: Skilled personnel
EN
Only use original parts, see chapter 11 "Accessories".
WARNING!
Physical injuries and damage to property and the environment caused
by hazardous media
Upon contact with hazardous media (e.g. oxygen, acetylene, flammable
or toxic substances), harmful media (e.g. corrosive, toxic, carcinogenic,
radioactive), and also with refrigeration plants and compressors, there is a
danger of physical injuries and damage to property and the environment.
Should a failure occur, aggressive media with extremely high temperature
and under high pressure or vacuum may be present at the instrument.
▶

6.1 Commissioning

Before switching the instrument on, connect the reference pressure sensor,
otherwise it may not be correctly identified by the instrument, see chapter
4.5.2 "Connecting/changing pressure sensors".
Before switching on, connect the reference pressure sensor(s) to the intended female
connector of the hand-held and make sure that a fully charged 9 V battery or a fully
charged rechargeable 9 V battery is inserted.
The connection sockets are marked on the instrument case with 1 or 2 correspondingly
(only with CPH6200-S2). Next to these are located the serial or analogue interfaces.

6.2 Operation

Switching the instrument on, if the logger function is selected, the integrated clock's time
will be displayed briefly. If a zero point correction has been carried out, the display will
indicate this by showing "nuLL Corr".
After changing the battery, the menu for setting the clock "CLOC" is displayed
automatically. For checking the clock and adjusting if necessary, see chapter
6.4.11 "Real-time clock (CLOC)".
18
For these media, in addition to all standard regulations, the appropriate
existing codes or regulations must also be followed.
WIKA operating instructions, model CPH6200