Reinitialising Usb Input Devices - G&D VisionXS-IP-F-DP-UHR Installation Und Bedienung

Reinitialising USB input devices

When you connect a USB keyboard or mouse to the KVM extender, the input
device is initialized and ready for use.
Some USB input devices require the USB connection to be re-initialized after a
period of time. Enable automatic re-initialization of USB input devices if a USB
keyboard or mouse stops responding to your input during operation.
How to enable/disable reinitialisation of USB input devices:
1. Press Ctrl+Num
2. Select the row
3. Under
USB auto refresh
only faulty  The status of the USB devices is monitored.
If communication to a USB device is interrupted, this
device is reinitialised (default).
all  The status of the USB devices is monitored.
If communication to one USB device is interrupted, all
devices are reinitialised.
 The status of the USB devices is
off
If communication to a USB device is interrupted, the
device is
4. Press F2 to save your settings.
(default) to open the OSD.
Console setup and press
press to select one of the following options:
F8
not reinitialised.
Enter .
not monitored.
G&D VisionXS-IP-F-DP-UHR · 86
Configuration