G&D VisionXS-IP-F-DP-UHR Installation Und Bedienung Seite 155

6. Enter/edit the following data:
Name:
Hostname:
Control port:
Select-Keys
NOTE:
In the Hostname
the Detected devices
(computer modules and matrix switches).
Select the desired remote station and press
remote station.
7. Press F2 to save your settings.
How to delete a remote target:
1. Use the local hotkey
2. Press F11 to open the Configuration menu.
3. Select the entry
KVM Connection
4. Select the entry
Remote target
5. Use the arrow keys to select the remote target you want to delete and
press the F4 key.
6. Confirm the safety prompt to delete the remote target.
Establishing a KVM-over-IP™ connection for the first time
Enter the name of the G&D remote station to be
displayed in the Select menu.
Enter the IP address/host name of the
G&D remote station.
Enter the number of the
in the G&D remote station.
Enter the desired select key.
field, you can use the key combination
dialog. This dialog shows you all unpaired remote stations
Alt + Num to open the OSD of the console module.
and press
Enter
and press
Enter
Control port configured
Ctrl+F8
Enter to apply the IP address of the
.
.
G&D VisionXS-IP-F-DP-UHR · 34
to open