Herunterladen Inhalt Inhalt Diese Seite drucken

Establishing A Kvm-Over-Ip™ Connection For The First Time; Default Setting Of The Modules - G&D VisionXS-IP-F-DP-UHR Installation Und Bedienung

Vorschau ausblenden Andere Handbücher für VisionXS-IP-F-DP-UHR:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Establishing a KVM-over-IP™ connection for the first time
Establishing a KVM-over-IP™
connection for the first time
IMPORTANT:
If you use the KVM extender as a matrix module with the IP matrix
switch
ControlCenter IP
over-IP™ connection
for the web application of the IP matrix switch).
Manual configuration as described in this chapter is not necessary in this case.
G&D's
KVM-over-IP™
computer and the console module using a Gigabit Ethernet (layer 3).
The communication between two modules requires various settings. In the default
settings, the modules are configured in a way that a computer and a console module
can immediately establish a direct connection.
All computer modules are preconfigured with the IP address
modules with the IP address
IMPORTANT:
Change the default IP addresses before integrating several computer
or console modules into the productive network.
ADVICE:
If you do not know the IP address of an already configured user or com-
puter module, it can be determined via the log messages of the device. For more
information, see the section Determining network settings via service port on page 96.

Default setting of the modules

The default setting of the modules allows users to quickly establish a direct connec-
tion between a computer and a console module. The OSD lets you adjust the config-
uration of both modules after their initial operation.
Both the IP addresses and the
DEFAULT SETTING OF THE COMPUTER MODULE (CPU)
IP address:
Netmask
Control port:
Communication port:
Data port:
27 · G&D VisionXS-IP-F-DP-UHR
or
ControlCenter-IP-XS
via the web application of the IP matrix switch (see instructions
technology makes it possible to transmit signals between the
172.17.0.11
KVM-over-IP
172.17.0.10
255.255.0.0
18246
18245
18244
, you can conveniently set up the
.
settings are preconfigured as follows:
KVM-
, all console
172.17.0.10

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis