Restricting Kvm-Over-Ip Remote Stations (Uid Locking) - G&D VisionXS-IP-F-DP-UHR Installation Und Bedienung

Restricting KVM-over-IP remote stations (UID locking)

By default, each IP matrix and each console module is allowed to establish a KVM-
over-IP connection to the computer module..
ADVICE: Activate the function
switches or console modules should be able to connect to the computer module.
How to enable/disable UID locking:
1. Use the remote hotkey Ctrl+
2. Select the row
System setup
3. Select the row
System security
4. Under UID Locking press
None  All remote stations may establish a KVM-over-IP connection
(default).
 Only the remote stations specified in the list may establish a
UID
KVM-over-IP connection.
5. Select the row Permit all connected devices
ted and you want to enable a KVM-over-IP connection for all connected devices.
6. Select the row
Manage permitted devices
add any devices.
F4: Delete  Mark the device, that you want to remove from the list, press
and confirm you selection.
 Press
F3: Add
 Under Device type press F8 to select the device type you want to add.
 Enter the UID of the device under
7. Press F2 to save your settings.
Establishing a KVM-over-IP™ connection for the first time
UID locking if you want to specify which IP matrix
Num to open the OSD.
and press
Enter
and press
Enter
F8 to select one of the following options:
and press
and press
.
F3
.
.
Enter , if UID Locking is activa-
, if you want to remove or
Enter
Device UID .
G&D VisionXS-IP-F-DP-UHR · 38
F4