Add, Configuration And Deletion Of A Remote Target - G&D VisionXS-IP-F-DP-UHR Installation Und Bedienung

Establishing a KVM-over-IP™ connection for the first time

Add, configuration and deletion of a remote target

How to add a new remote target:
1. Use the local hotkey
2. Press F11 to open the Configuration menu.
3. Select the entry
4. Select the entry
5. Press the key to create a new remote target.
F3
6. Enter the following data:
Name:
Hostname:
NOTE:
In the Hostname
the Detected devices
(computer modules and matrix switches).
Select the desired remote station and press
remote station.
7. Press to save your settings.
F2
How to configure a remote target:
1. Use the local hotkey
2. Press to open the Configuration menu.
F11
3. Select the entry
4. Select the entry
5. Use the
arrow keys
key.
F5
33 · G&D VisionXS-IP-F-DP-UHR
+ to open the OSD of the console module.
Alt Num
and press
KVM Connection
Remote target and press
Enter the name of the G&D remote station to be
displayed in the Select menu.
Enter the IP address/host name of the
G&D remote station.
field, you can use the key combination
dialog. This dialog shows you all unpaired remote stations
Alt + Num to open the OSD of the console module.
KVM Connection and press
Remote target and press
to select the remote target to be configured and press the
.
Enter
Enter .
Enter to apply the IP address of the
Enter .
Enter .
Ctrl+F8 to open