Configuring Global Network Settings - G&D VisionXS-IP-F-DP-UHR Installation Und Bedienung

Configuring global network settings

Even in complex networks global network settings ensure that the KVM extender is
available from all partial networks.
How to configure global network settings:
1. Use the
local hotkey
work interface of the console module or use the
open the remote OSD to configure the network interface of the computer module.
2. Select the entry Network setup
3. Select the entry
Interfaces
4. Enter the following data under
Global Press
preferences:
 Static:
 DHCP:
Hostname:
Enter the device hostname.
Domain: Enter the domain the device is to belong to.
Gateway:
Enter the gateway IP address.
DNS Server 1: Enter the IP address of the DNS server.
DNS Server 2: Optionally, enter the IP address of another DNS server.
5. Press F2 to save your settings.
(default: + ) to open the local OSD to configure the net-
Alt Num
and press Enter
and press .
Enter
Main Network
to select the global preferences:
F8
uses static settings.
obtains settings from a DHCP server.
Initial configuration of the network settings
remote hotkey (default:
.
:
G&D VisionXS-IP-F-DP-UHR · 22
Ctrl + Num ) to