Herunterladen Inhalt Inhalt Diese Seite drucken

Information Display; Adjusting The Transparency Of The Osd - G&D VisionXS-IP-F-DP-UHR Installation Und Bedienung

Vorschau ausblenden Andere Handbücher für VisionXS-IP-F-DP-UHR:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Information display

Information displays are shown temporarily (5 seconds) in the upper left corner.
ADVICE:
If the temporary information display is active, you can press the hotkey
Ctrl+Caps Lock
to repeat the caption.
The information display can also be shown permanently or it can be disabled
How to change the setting of the information display:
1. Press
Ctrl+Num
2. Press
F10
to open the
3. Under
Display
press
 information display is turned off
off
 information display is shown temporarily for 5 seconds (default)
temp
permt
 permanent information display
4. Press
F2
to save your settings.

Adjusting the transparency of the OSD

In the default settings of the KVM switch, the OSD covers parts of the screen con-
tent. However, the parts of the screen contents covered by the OSD are still visible.
You can adjust the transparency level or turn the transparency off.
How to adjust the transparency of the OSD:
1. Press
Ctrl+Num
2. Press
F10
to open the
3. Under
OSD transparency
high
 high transparency of the screen content
 average transparency of the screen content (default)
average
low
 low transparency of the screen content
off
 screen content is covered
4. Press
F2
to save your settings.
(default) to open the OSD.
Personal Profile
menu.
F8
to select between the following options:
(default) to open the OSD.
Personal Profile
menu.
press
F8
to select one of the following options:
Configuration
G&D VisionXS-IP-F-DP-UHR · 92

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis