Accessing A Remote Target Via Select Keys - G&D VisionXS-IP-F-DP-UHR Installation Und Bedienung

Accessing a remote target via select keys

Calling the OSD is not required when accessing the remote targets using select keys.
The remote targets can be accessed faster via select keys.
How to change the select key modifier or the valid keys:
1. Start the local OSD with the
2. Press F11 to open the Configuration menu.
3. Select the entry
Hotkey
4. Use the arrow key to select at least one of the Target Select-Key modifier listed in
the Target Select-Key modifier
Ctrl:
Alt:
Alt Gr:
Win:
Shift:
5. Select the Valid target Select-Keys
options:
Num:
Alph:
AlphNum:
IMPORTANT: Both the selected valid keys and the select key modifier are no
longer provided as key combinations to the operating system and the applica-
tions on the target computer.
6. Press to save your settings.
F2
Alt+Num hotkey (default)
and press .
Enter
entry. Afterward, press
Ctrl key
Alt key
Alt Gr key
Windows key
Shift key
entry and press
only numerical keys are interpreted as select keys when
pressed in combination with the select key modifier
only alphabetic keys are interpreted as select keys when
pressed in combination with the select key modifier
alphabetical and numerical keys are interpreted as select keys
when pressed in combination with the select key modi-
fier
IP-MUX functionality
F8 .
F8 to select one of the following
G&D VisionXS-IP-F-DP-UHR · 40