User Login At The Console Module; User Logout At The Console Module - G&D VisionXS-IP-F-DP-UHR Installation Und Bedienung

Start-up

User login at the console module

HINWEIS:
If the standard operating mode was set instead of the OpenAccess opera-
ting mode (default for extender operation), the system asks you to log in, after the
console module has been switched on.
How to log in at the system:
1. Enter the following data to the login box:
Username:
Password:
One-time password:
2. Press to log in and start the on-screen display.
Enter
IMPORTANT: The One-time password field only appears if 2-factor authentication is
enabled. For detailed information, please refer to the separate manual of the web
application.

User logout at the console module

Use the User logout function to log out of the system. If the standard operating mode
was set and the logout was successful, the Login window opens.
IMPORTANT: Always use the User logout function of the system to protect the con-
sole module and system against unauthorised access.
How to log out of the system:
1. Press the Ctrl + Num
2. Press to open the Operation menu.
F9
3. Press E or select the
ADVICE: After the on-screen display has been called up, you can use the User logout
function by pressing
19 · G&D VisionXS-IP-F-DP-UHR
Enter your username.
Enter your user account password.
Enter your one-time password.
(default) hotkey to open the on-screen display.
E - User logout entry and press
Ctrl + E .
Enter .