Opening The Osd Via Double Keypress - G&D VisionXS-IP-F-DP-UHR Installation Und Bedienung

Opening the OSD via double keypress

As an alternative to opening the OSD with the hotkey
key+ OSD key you can also open the OSD by pressing a configured key twice.
How to enable/disable the activation of the OSD via double keypress:
1. Open the remote OSD of the computer module by pressing the
(default: Ctrl+Num
Open the local OSD of the console module by pressing the
(default: Alt+Num
2. Select the row
3. Select the row
4. Under OSD via 2x keypress
Off  OSD cannot be opened via double keypress (default)
 OSD is opened by pressing the Ctrl key twice
Ctrl
 OSD is opened by pressing the Alt key twice
Alt
Alt Gr  OSD is opened by pressing the Alt Gr key twice
Win  OSD is opened by pressing the Windows key twice
 OSD is opened by pressing the Shift key twice
Shift
 OSD is opened by pressing the Print key twice
Print
5. Press F2 to save your settings.
), if you want to change the hotkey for the remote OSD.
), if you want to change the hotkey for the local OSD.
System setup and press
and press .
Hotkey Enter
select one of the following options:
Hotkey+ OSD key
Enter (remote OSD) or
G&D VisionXS-IP-F-DP-UHR · 76
Configuration
or Double hot-
remote hotkey
local hotkey
F11 (local OSD).