Reading Out The Status Of The Network Interfaces - G&D VisionXS-IP-F-DP-UHR Installation Und Bedienung

Reading out the status of the network interfaces

The current status of both network interfaces can be read out in the OSD.
How to detect the status of the network interfaces:
1. Open the remote OSD of the computer module by pressing the
(default: ), if you want to change the configuration of the computer
Ctrl+Num
module.
Open the local OSD of the console module by pressing the
Alt+Num ), if you want to change the configuration of the console module.
2. Select the row
Network setup
work and press Enter
3. Select the row Link status
4. The paragraphs Transmission
Link detected:
5. Click on ESC to leave the menu.
Initial configuration of the network settings
and press
Enter
(local OSD).
and press Enter .
and Interface A
Connection to the network established (
connected ( no ).
remote hotkey
local hotkey
(remote OSD) or , select the row
F11
include the following values:
G&D VisionXS-IP-F-DP-UHR · 26
(default:
Net-
yes ) or dis-