Operating The Osd Via Keyboard Or Mouse - G&D VisionXS-IP-F-DP-UHR Installation Und Bedienung

Operating the OSD via keyboard or mouse

Keyboard operation
The OSD is mainly operated by keyboard. The table below shows a list of frequently
used keys:
Arrow keys: Press the arrow keys
Right
Enter:
Use this key to confirm inputs of open a submenu.
Esc: This key closes the displayed menu and shows the superior
menu.
A message is shown if entries are changed but not saved.
Tab key: Use this key to move the cursor within the list field from one
menu item to the next (or vice versa).
F2: Press this key to save your settings.
The displayed menu closes after the settings are saved and the
superior menu is displayed again.
F8: Press this key to switch between the different options of a menu
item.
Ctrl+F8:
Configuration settings with many options support this hotkey
to open a clearly-arranged list containing all options.
and
Up
) to move the cursor between the different menu items.
On-screen display
(in some menus also
Down
G&D VisionXS-IP-F-DP-UHR · 44
and
Left