Initial Configuration Of The Network Settings - G&D VisionXS-IP-F-DP-UHR Installation Und Bedienung

Initial configuration of the
network settings
A basic requirement to access the web application of the KVM extender is the con-
figuration of the network settings of the computer module and the console module.
NOTE: In the default settings the following settings are preselected:
 IP address of Network Interface A:
 global network settings: settings are obtained via
The required configuration settings can be made directly at the console.
IMPORTANT: At the console, you can use the
and configure the local OSD of the console module and the
Ctrl + Num ) to open and configure the remote OSD of the computer module.
During the starting process of the console module the settings of both hotkeys are
shown (see Starting process on page 18).

Initial configuration of the network settings

192.168.0.1
DHCP
local hotkey
G&D VisionXS-IP-F-DP-UHR · 20
(default: + ) to open
Alt Num
(default:
remote hotkey