Configuration
Reinitialising USB input devices
When you connect a USB keyboard or mouse to the KVM extender, the input
device is initialized and ready for use.
Some USB input devices require the USB connection to be re-initialized after a
period of time. Enable automatic re-initialization of USB input devices if a USB
keyboard or mouse stops responding to your input during operation.
How to enable/disable reinitialisation of USB input devices:
1. Press
Ctrl+Num
2. Select the row
3. Under
USB auto refresh
only faulty
all
off
4. Press
to save your settings.
F2
85 · G&D VisionXS-IP-C-DP-UHR
(default) to open the OSD.
and press
Console setup
press
F8
The status of the USB devices is monitored.
If communication to a USB device is interrupted, this
device is reinitialised (default).
The status of the USB devices is monitored.
If communication to one USB device is interrupted, all
devices are reinitialised.
The status of the USB devices is
If communication to a USB device is interrupted, the
device is
not
reinitialised.
.
Enter
to select one of the following options:
not
monitored.