Configuring A Kvm-Over-Ip Connection - G&D VisionXS-IP-F-DP-UHR Installation Und Bedienung

4. Enter the following data under
Global Press
preferences:
 Static:
 DHCP:
Hostname: Enter the device hostname.
Domain:
Enter the domain the device is to belong to.
Gateway: Enter the gateway IP address.
DNS 1: Enter the IP address of the DNS server.
DNS 2:
Optionally, enter the IP address of another DNS server.
5. Press F2 to save your settings.

Configuring a KVM-over-IP connection

The IP address of the console module (host) as well as the
module must be specified to establish a
puter module.
The configuration of both the
exchanged between the two modules.
NOTE: The configuration of both the
automatically exchanged between the two modules.
How to configure a KVM-over-IP connection:
1. Use the remote hotkey
2. Select the entry
KVM connection
3. Enter the following data under
Control port:
Communication port:
Data port:
4. Press F2 to save your settings.
Establishing a KVM-over-IP™ connection for the first time
Main Network :
F8 to select the global preferences:
uses static settings.
obtains settings from a DHCP server.
KVM-over-IP
communication ports
communication ports
Ctrl + Num to open the OSD of computer module.
and press
Enter
Network setting
Enter the number of the port you want to use.
Enter the number of the port you want to use.
Enter the number of the port you want to use.
control port of the computer
connection through the com-
and the data ports are automatically
and the data ports
.
:
G&D VisionXS-IP-F-DP-UHR · 30
are