G&D VisionXS-IP-F-DP-UHR Installation Und Bedienung Seite 132

Installation
Establishing a connection to the Gigabit Ethernet
Transmission 1 Transmission 2 Transmission 2
Service Service
IMPORTANT:
The devices use components with laser technology which comply
with laser class 1.
Never stare directly into the beam when wearing optical instruments!
NOTE: Remove the protection caps from the Transmission interfaces and from the
cable plug.
Transmission 1|Tx: Insert the LC plug of a fibre optic cable, which is available as
accessory, into this interface. Connect the other end to the Gigabit Ethernet.
Insert the LC plug of a fibre optic cable, which is available as
Transmission 1|Rx:
accessory, into this interface. Connect the other end to the Gigabit Ethernet.
NOTE: The activation of the
interface.
To use the Transmission 2
Choose the right
The
Transm. Redundancy options
Transm. Redundancy feature
Use this interface to establish a redundant transmission connection (link aggregation)
with the Gigabit network.
11 · G&D VisionXS-IP-F-DP-UHR
Network Network Pwr Main Power Pwr Main Power
Transm. Redundancy
interface, you need an additional SFP transceiver.
SFP transceiver for your variant of the
contain both, a corresponding
.
Red. Power Red. Power
feature activates the
VisionXS-IP-F-DP-UHR
SFP transceiver
Transmission 2
series.
and the