Restricting Kvm-Over-Ip Remote Stations (Uid Locking) - G&D VisionXS-IP-C-DP-UHR Installation Und Bedienung

Establishing a KVM-over-IP™ connection for the first time

Restricting KVM-over-IP remote stations (UID locking)

By default, each IP matrix and each console module is allowed to establish a KVM-
over-IP connection to the computer module..
ADVICE:
Activate the function
switches or console modules should be able to connect to the computer module.
How to enable/disable UID locking:
1. Use the remote hotkey Ctrl+
2. Select the row System setup
3. Select the row
System security
4. Under UID Locking
 All remote stations may establish a KVM-over-IP connection
None
(default).
UID  Only the remote stations specified in the list may establish a
KVM-over-IP connection.
5. Select the row
Permit all connected devices
ted and you want to enable a KVM-over-IP connection for all connected devices.
6. Select the row
Manage permitted devices
add any devices.
F4: Delete  Mark the device, that you want to remove from the list, press
and confirm you selection.
 Press
F3: Add
 Under Device type press F8 to select the device type you want to add.
 Enter the UID of the device under
7. Press F2 to save your settings.
37 · G&D VisionXS-IP-C-DP-UHR
UID locking
to open the OSD.
Num
and press
and press
press F8 to select one of the following options:
F3 .
if you want to specify which IP matrix
Enter .
.
Enter
and press , if UID Locking is activa-
Enter
and press , if you want to remove or
Enter
Device UID
F4
.