Reading Out The Status Of The Network Interfaces - G&D VisionXS-IP-C-DP-UHR Installation Und Bedienung

Initial configuration of the network settings

Reading out the status of the network interfaces

The current status of both network interfaces can be read out in the OSD.
How to detect the status of the network interfaces:
1. Open the remote OSD of the computer module by pressing the
(default: Ctrl+Num
module.
Open the local OSD of the console module by pressing the
Alt+Num ), if you want to change the configuration of the console module.
2. Select the row
Network setup
and press
work Enter
3. Select the row Link status
4. The paragraphs
Link detected:
5. Click on ESC to leave the menu.
25 · G&D VisionXS-IP-C-DP-UHR
), if you want to change the configuration of the computer
and press
(local OSD).
and press Enter
and
Transmission Interface A
Connection to the network established (
connected (
no
(remote OSD) or
Enter
.
include the following values:
).
remote hotkey
(default:
local hotkey
, select the row
F11
) or dis-
yes
Net-