Herunterladen Inhalt Inhalt Diese Seite drucken

Setting Date & Time - GF U3000 V2 Betriebsanleitung

Ultraschall-durchflussmessgerät
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 73
User Manual
4.6.3
Setting Date & Time
System Settings
Lock-screen Timeout
Back - light mode
Back - light Timeout
- > Set Date & Time..
Reset Totals..
Damping
Set Date & Time
- > Set Date & Time
Mode
Exit
NOTICE
If you make a mistake when entering the data press the Delete key to move the cursor back to the number you wish to change, then
continue. If you enter an invalid number an 'ERR:Invalid Date or Time!' error message is displayed on the second line of the screen.
If this occurs repeat the set date/time procedure.
If you make a mistake when entering the data press the Delete key to move the cursor back to the number you wish to change, then
continue. If you enter an invalid number an 'ERR:Invalid Date or Time!' error message is displayed on the second line of the screen.
If this occurs repeat the set date/time procedure.
DD-MM-YY
HH:MM:SS
90
sec
ON
75
sec
10
sec
DD-MM-YY
HH:MM:SS
DD-MM-YY.HH:MM:SS
DD-MM-YY
1.
From the MAIN menu, use the Up and Down scroll keys
to select Setup Instrument. Press the ENTER Key. With
System selected in the Options menu, press the ENTER
Key.
Alternatively, from a Read Flow/Velocity/Energy screen,
press the SYSTEM key (2). The System Settings menu is
displayed.
2.
Use the UP/DOWN arrow keys to select Set Date & Time.
Press the ENTER key.
3.
The Set Date & Time menu is displayed.
4.
The instrument is configured to display dates in DD-MM-YY
format. Proceed to step 6 unless you prefer to use MM-DD-
YY format.
5.
Use the UP/DOWN arrow keys to select Mode. Press the
ENTER key.
6.
Use the UP/DOWN arrow keys to choose the required
format: DD-MM-YY or MM-DD-YY. Press the ENTER key. The
date and time format will immediately be updated.
7.
Use the UP/DOWN arrow keys to select Set Date & Time.
Press ENTER. A flashing cursor appears under the first
date number. Enter the date and time sequence in DD-MM-
YY-HH-MM-SS format then press the ENTER key.
8.
Scroll down and select Exit then press the ENTER key to
return to the MAIN menu.
Installation
29

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis