About this document
2.2
Other related documents
•
Georg Fischer industrial planning fundamentals
These documents are available through agents of GF Piping Systems or at www.gfps.com.
2.3
Abbreviations
Abbreviation
ABS
DA
EMC
FC
FO
LCD
LED
MOSFET
PB-INSTAFLEX
PE-ELGEF
PP-PROGEF
PVDF-SGEF
SPNO MOSFET
VC-U-PVC
2.4
Safety and responsibility
► Only use the product for the intended purpose, see Intended Use.
► Do not use any damaged or faulty product. Sort out any damaged product immediately.
► Make sure that the piping system has been installed professionally and that it is inspected regularly.
► Have the product and accessories installed only by persons who have the required training, knowledge or experience.
► Regularly train personnel on all questions regarding the locally regulations applying to occupational safety and environmental
protection, especially for pressurised pipelines.
2.5
Transport and storage
► Protect the product against external forces during transport (impacts, knocks, vibrations etc.).
► Transport and / or store the product unopened in its original packaging.
► Protect the product from dust, dirt, moisture as well as heat and ultraviolet radiation.
► Ensure that the product is not damaged either by mechanical or thermal influences.
► Before assembling, check the product for damage during transport.
8
Description
Acrylonitrile-butadiene-styrene
Double acting function
Electromagnetic Compatibility
Fail safe to close function
Fail safe to open function
Liquid crystal display
Light-emitting diode
Metal oxide semiconductor field effect transistor
Polybutene plastic piping system
Polyethylene plastic piping system
Polypropylene plastic piping system
PVDF (polyvinylidene fluoride) plastic piping system
Single-pole normally open metal oxide semiconductor field effect transistor
Polyvinyl chloride
User Manual