Setting Date & Time - GF PF220 V2 Betriebsanleitung

Operating Instructions
7.2.3 Setting Date & Time
System Settings
Lock-screen Timeout
Back - light mode
Back - light Timeout
- > Set Date & Time..
Reset Totals..
Damping
Set Date & Time
- > Set Date & Time
Mode
Exit
NOTICE
If you make a mistake when entering the data press the Delete key to move the cursor back to the number you wish to change, then
continue. If you enter an invalid number an 'ERR:Invalid Date or Time!' error message is displayed on the second line of the screen.
If this occurs repeat the set date/time procedure.
7.2.4 Enabling/disabling the backlight
The backlight can be selected to be OFF, TIMED (illuminated until a set interval of keypad inactivity occurs), or ON permanently. If
the backlight is not required it is recommended that you disable it or use the TIMED option to prolong the battery discharge time.
System Settings
. . Lock-screen Timeout
-> Back - light mode
Back - light Timeout
Set Date & Time..
Reset Totals..
Damping
DD-MM-YY HH:MM:SS
90 sec
ON
75 sec
10 sec
DD-MM-YY HH:MM:SS
DD-MM-YY.HH:MM:SS
DD-MM-YY
DD-MM-YY HH:MM:SS
90 sec
ON
75 sec
10 sec
1. From the MAIN menu, use the Up and Down scroll keys
to select Setup Instrument. Press the ENTER Key. With
System selected in the Options menu, press the ENTER
Key.
Alternatively, from a Read Flow/Velocity/Energy screen,
press the SYSTEM key (2). The System Settings menu is
displayed.
2. Use the UP/DOWN arrow keys to select Set Date & Time.
Press the ENTER key.
3. The Set Date & Time menu is displayed.
4. The instrument is configured to display dates in DD-MM-YY
format. Proceed to step 6 unless you prefer to use MM-DD-
YY format.
5. Use the UP/DOWN arrow keys to select Mode. Press the
ENTER key.
6. Use the UP/DOWN arrow keys to choose the required
format: DD-MM-YY or MM-DD-YY. Press the ENTER key. The
date and time format will immediately be updated.
7. Use the UP/DOWN arrow keys to select Set Date & Time.
Press ENTER. A flashing cursor appears under the first
date number. Enter the date and time sequence in DD-MM-
YY-HH-MM-SS format then press the ENTER key.
8. Scroll down and select Exit then press the ENTER key to
return to the MAIN menu.
1. From the MAIN menu, use the Up and Down scroll keys
to select Setup Instrument. Press the ENTER Key. With
System selected in the Options menu, press the ENTER
Key.
Alternatively, from a Read Flow/Velocity/Energy screen,
press the SYSTEM key (2). The System Settings menu is
displayed.
2. Use the UP/DOWN arrow keys to select
Back-light mode. Press the ENTER key.
3. Use the UP/DOWN arrow keys to scroll through the
available options: On/Timed/Off.
4. With the chosen mode selected, press the ENTER key.
5. If you select TIMED, use the UP/DOWN arrow keys to select
to Back-light Timeout. Press the ENTER key.
6. Use the keypad to enter the required timeout interval (5-
120s). Press the ENTER key.
7. Select Save Setup & Exit then press the ENTER key to
return to the Options menu.
8. Select Exit then press the ENTER key to return to the Main
menu
Installation
25