Configuring The «Global» Network Settings - G&D ControlCenter-Compact Serie Installation Und Bedienung

Initial configuration of network settings
4. Select the Network
5. Select the
Settings
6. Enter the following data in the
face Network B) section:
Operational
mode:
IP address:
Netmask:
Connection type:
7. Press F2 to save your settings.
Configuring the «global» network settings
In complex networks, the global network settings ensure that the matrix switch is
available from all sub networks.
How to configure the global network settings:
1. Press Ctrl+Num
2. Press to call the Configuration menu.
F11
3. Select the Network
4. Select the Settings
15 · G&D ControlCenter-Compact
entry and press Enter
entry and press
Enter
Interface A
Press F8 to select the operating mode of the interface
Network A or Network B
switches off network interface.
 Off:
uses static settings.
 Static:
obtains the settings from a DHCP server.
 DHCP:
Enter the interface IP address.
This setting is auto obtained in the DHCP operating mode.
Enter the network netmask.
This setting is auto obtained in the DHCP operating mode.
Press to define if the network port and its communication
F8
partner are to negotiate the connection type automatically
( ) or select one of the listed types.
Auto
(default) to open the on-screen display of the KVM matrix system.
entry and press Enter
entry and press Enter
.
.
(interface Network A) or
:
.
.
Interface B (inter-