Adding Or Deleting Modules From A Channel Group - G&D ControlCenter-Compact Serie Installation Und Bedienung

Expanding switchable signals

Adding or deleting modules from a channel group

How to add modules to or delete them from a channel group:
1. In the menu, click on
2. Click on a console module or a target module that is already assigned to the chan-
nel group to which you want to add another module or from which you want to
delete a module.
3. Click on
Channel grouping
Now you can see the current configuration. The right column (
the matrix switch modules you can add to the channel group.
NOTE:
You can assign up to seven additional video channels and a USB or
RS232 channel to a console's KVM channel.
You can assign up to seven additional video channels to the KVM channel of the
computer, too. In addition, you can create
RS 232 channel and for each of the four multi-channels.
4. Add more modules to or delete them from the channel group:
Adding modules:
Deleting modules:
5. Click on Save .
27 · G&D ControlCenter-Compact
Matrix systems > [Name] > User modules
.
 In the right column (
ule you want to add. In the left column (
), click on the channel to which you want to
group
add the module.
 Click on (arrow left) to assign the module to the
selected channel.
 In the right column (
you want to delete from the channel group.
 Click on (arrow right) to delete the module's
assignment.
or
of four devices for the USB 2.0/
pools
), click on the mod-
Unassigned
Assigned ), click on the module
.
Target modules
) lists
Not assigned
Device