G&D ControlCenter-Compact Serie Installation Und Bedienung Seite 69

4. Select the Cascade mode
Auto: The central module defines if it works in the master or slave mode.
Master:
In this operating mode, you can only connect user modules to
Dynamic Ports that are configured for the connection of target mod-
ules.
You can change the names of the connected target modules. The
changed names are automatically updated on the slave devices of the
cascade.
Slave:
In this operating mode, you cannot change the names of connected
target modules. The names of the target modules are automatically
obtained from the master device.
5. Press to save your settings.
F2
Expanding the KVM matrix system by cascading
entry and press F8 to choose one of the listed options:
G&D ControlCenter-Compact · 24