Start-Up; Setting Up Device; Connect/Disconnect Power Cord - Heidolph Unimax 2010 Bedienungsanleitung

Start-Up

Setting up device


➜ Locate the shaker on a stable, horizontal surface.
➜ Clean surface and feet with a damp cloth and ethanol regularly.

Connect/disconnect power cord


Connect power cord
The power cord comes with a three-wire
plug and a recess on the bottom side.
The socket is located on the back side of
the unit.
➜ Connect plug to the socket with the
recess facing down.
➜ Push plug up against socket until
securely attached.
➜ Connect plug to power socket.
Disconnect power cord
➜ Disconnect plug from power socket first.
➜ Then disconnect plug from socket on unit.
Warning:
Risk of slipping device!
As a result of vibrations generated during operation the device might
slide off the table top.
The surface must be smooth and clean and should be properly
leveled.
Start-Up
Unit plug
Unit socket
11
Power cord