Operation; Operation And Controls - Heidolph Vibramax 100 Bedienungsanleitung

Operation

Operation and controls


➜ Turn item ON with the On/Off switch.
➜ Set shaker frequency with speed setting knob.
➜ Select continuous mode (symbol 0) or timer controlled mode (timer) with select mode
switch.
✓ In the timer mode, shaking action can be selected between 0 and 120 minutes.
✓ After time elapsed, item will stop shaking. A buzzer sounds.
✓ In case of power supply failure the timer will continue running.
Operation
Caution:
Risk of breakage and spillage
If the vessels are not attached securely they may fall out and spill
the sample.
Prior to switching the unit on ensure that all vessels are securely
fastened.
Warning:
Risk of poisoning
Open vessels and to high vibration frequencies may result in samples
splashing.
Close all vessels tight especially if sample is dangerous or toxic.
Adjust vibration frequency step by step until you have reached the
required rpm settings..
Wear safety glasses and especially with dangerous and toxic samples
appropriate protective clothing.
A single fl ask should be arranged in the middle of the shaker plate.
Several fl asks should be distributed equally on the plate.
At high loads (load bearing capacity of shaker plate) and high
frequency of shaking, always make reference to load graph as
applicable for your item (refer to "Technical data").
When using shakers inside conditioning cabinets, make reference to
ambient conditions as stipulated in the "Technical data" section.
14