NSK Primado2 Bedienungsanleitung Seite 15

Cleaning / Lubrication / Checking of the Attachment, Slim Attachment Hub and Slim Tube
_ Drying
1 Remove moisture on the surface of the product using a dry
cloth, air gun, etc.
7 – 1 – 2 Automated Cleaning
Automated Cleaning with Cleaning Tools
Use the Cleaning Tools according to the following system figure.
ⒶCleaning Adaptor Luer M
Attachment
Slim Attachment Hub
Slim Tube
Attachment
Attachment
*1 Select the adaptor which matches the shape of the connection of the washer-disinfector.
ⒷCleaning Tube 6.0/L50
Cleaning Adaptor SM
Cleaning Adaptor 1T
Cleaning Adaptor HM
Cleaning Adaptor WPD
2 Visually check that all contamination is removed.
In case there is residual contamination, repeat the procedures
of Pre-cleaning through Drying until all contamination is
removed.
Proceed to Lubrication (see "7 – 2 Lubrication")
ⒸCleaning Tube 6.0/L650
Cleaning
*2
Cleaning Adaptor G
*3
*2: With O-ring (Order Code: D0312074080)
*3: With O-ring (Order Code: D0312150150)
14
ⒹCleaning Adaptor Luer F
*1
Drying
Ⓐ Ⓑ
Cleaning Holder
Air Gun
Ⓒ
Ⓓ