Setting Aux Output Switching Time - Sygonix Touch S Bedienungsanleitung

q) Setting AUX output switching time
This function enables to set the AUX output switching time from 001 to 999 seconds (for toggle
mode, the default setting is 000 seconds).
The switching time should necessarily be programmed for one of the functions
selected according to section 8. p).
When the switching time is set to "000", the AUX output switch contact operates in toggle mode,
and the switch output changes the switch position. The same applies to AUX functions
as described in section 8. p).
Proceed as follows:
• Enter the master code twice to start the programming mode, as described in section 8. a).
The yellow LED must light up.
• Enter the programming code to set the AUX output switching time:
• The code lock will emit 2 beeps.
• Enter the desired AUX output activation time.
Example 1: Activation time is 8 seconds:
Example 2: Toggle mode:
• The code lock will emit a long beep.
• Other settings can now be made, if desired. Press the
mode.
Example 1 for an 8-second activation time; it can be set for AUX functions
in section 8. p) (first start programming mode, see section 8. a):
Example 2 for toggle mode; toggle mode only applies to AUX functions
in section 8. p) (first start programming mode, see section 8. a):
68
button to exit the programming
to as described
and as described
to
and