Herunterladen Inhalt Inhalt Diese Seite drucken

Installation; Personnel Qualifications; Operator Responsibilities; Safety - Wilo Atmos GIGA-I Einbau- Und Betriebsanleitung

Mit kartuschen-gleitringdichtung
Vorschau ausblenden Andere Handbücher für Atmos GIGA-I:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

en
7

Installation

7.1

Personnel qualifications

7.2

Operator responsibilities

7.3

Safety

52
Installation
Motor power [kW]
75
90
110
132
160
200
250
1)
Spatial mean value of sound-pressure levels on a square measuring surface at a dis-
tance of 1 m from the surface of the motor
Table 3: Anticipated noise levels (50 Hz)
ƒ
Installation/dismantling work: The installation/dismantling must be carried out by a
qualified technician who is trained in the use of the necessary tools and fixation
materials.
ƒ
Observe national and regional regulations!
ƒ
Observe locally applicable accident prevention and safety regulations of profes-
sional and trade associations.
ƒ
Provide protective equipment and ensure that the protective equipment is worn by
personnel.
ƒ
Observe all regulations for working with heavy loads.
DANGER
Risk of fatal injury due to lack of protective devices!
Due to missing protective devices of the terminal box or in the range of the coup-
ling/motor, electric shock or contact with rotating parts can lead to life-threatening
injuries.
• Before commissioning, safety devices such as coupling covers that were removed
must be reinstalled!
DANGER
Risk of fatal injury from falling parts!
The pump itself and pump parts can be extremely heavy. Falling parts pose a risk of
cuts, crush injuries, bruises or impacts, which can be fatal.
• Always use suitable lifting equipment and secure parts against falling.
• Never stand underneath a suspended load.
• During storage and transport, as well as before all installation and assembly work,
ensure that the pump is in a safe position and standing securely.
WARNING

Hot surface!

The entire pump can become very hot. There is a risk of burns!
• Allow the pump to cool down before commencing any work!
WARNING
Risk of scalding!
At high fluid temperatures and system pressures, allow the pump to cool down first
and then depressurise the system.
Measuring surface sound-pressure level Lp, A [dB(A)]
2900 rpm
77
77
79
79
79
79
85
1)
1450 rpm
74
72
72
72
74
75
-
WILO SE 2022-06

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Atmos giga-b

Inhaltsverzeichnis